A password will be e-mailed to you.

A power tool is part and parcel of our lives we even forget it poses danger to its user. A tragic incident may occur if you don’t take precautionary measures to avoid a power-tool related accident. First of all, check if the electrical connection is suitable for your tool. Let the power tools have durable test tags. If the tagging of your power tool is overdue get a price quote from a certified Test and Tag Brisbane to help you comply with the test regulations.

First of all, check electrical connections to your tool. A timely lead tag is not only safe but when a tragedy strikes you reduce the time spent in looking for insurance claims. Follow basic safety rules to prevent hazards caused by your power tools.

Tool malfunction is not something you disregard. Perhapsunsurprisingly, power tools malfunction and have electrical issues. In fact, the tools wear and tear. Check out these 3 ways to safeguard the power tools and yourself. Before diagnosing any potential problems with your power tool disconnect its power source.

1. Is the power tool able to start with ease?

In case your table saw is not work check the electrical power outlet. You can reset the circuit breaker if the electrical outlet is not functioning. What if the outlet works? Check the motor. Most likely you have a failed motor if the overload is not tripped or tool’s motor won’t start.

Since the on/off switch can help start or stop the tool’s motor by replacing a defective switch you can solve the problem.

If a power saw’s cord is worn out or damaged replace it before you use in on the power saw. Or even better test a cut wire with a multimeter to establish that current flows through it. A broken cord stops the flow of electricity.

Is the power level weakened? If the tool starts but does not have the strength its carb brushes may need replacement because they are impeding the motor. Check for heavy wear or damage. The brushes transfer power from the source to your tool’s motor. If the brushes are clean check your tool’s commutator.

2.Is the power tool making high-pitched screeching noise?

  • In case of noise check if the tool is properly lubricated. Use the supplier’s manual on the best way to get the tool lubed.
  • Check the tool gears. Is it possible the gear switch is stuck between the tool’s gears? Move the switch back and forth then begin drilling again.

Does the power tool generate a burning smell?

Accumulated dust can cause the motor to produce unusual sound when it runs. Moreover, the dust can cause the motor to produce a stinky smell like a bad cigar. Regular maintenance helps increase the life of the motor.

  • Unplug the power tool and clean to remove debris.

3. Is the tool producing sparks and smoke?

Turn your tool off quickly if it begins emitting smoke or sparks. Before attempting to fix any issue or repair set it aside and allow it to cool off. Next, check if your tool has debris especially sawdust.

Power saw safety checklist

  • Keep the power saw free of dust. Usually, clouds of dust settle inside the gears, saw cabinet or adjustments controls.
  • Use a shop vacuum to clean. Or, use compressed air to blow off the dust and ensure the pressure is not set above 40 psi. Why? A higher pressure will blow the dust into other components of your tool.
  • You have to disconnect power supply to change or adjust the blade.
  • The cords should be off the cutting area.
  • Check overload switch
  • If the motor seems to struggle to turn it off and let it rest for a while in case of speedy sawing

Power drill safety tips

  • You strain the motor when the push is too hard. Let the drill do its work.
  • Make use of a power drill stand to avoid slips or scratching the piece of work
  • Use protective gear like gloves and safety goggles. Avoid baggy outfits usually caught in the drill.

Air compressor safety tips

  • Check the compressor’s voltage.
  • Is your compressor designed for indoor? Don’t bring out under different environmental conditions.
  • A rusty tank is likely to combust. Keep your tank drained.
  • The compressor requires skilled personnel to handle

Lastly, routine maintenance is the best way to keep your power tools safe. Adhere to the maintenance schedule to weed out potential problems before they set in. Your business is less likely to suffer downtime and the workers moral remains high. A simple check and adjustment can go a long way in eradicating tool problems. Moreover, the tool may only need an upgrade to satisfy your business requirements. Read the power tool’s manual it helps to contain the tool is a good working condition.