If you are the owner of a proud lawn, you know how important it is to keep it looking good – after all, that is why there are many landscaping services.
In addition, there are numerous homeowners that utilize the advantages of in-ground irrigation systems, as these reduce the workload of making sure their front yards look green and vibrant throughout the hotter months of the year. However, you also realize that these systems are not invincible – you will need to do some maintenance on them to reduce wastage of water and keep them working efficiently.
Before you decide to call landscape irrigation repair Phoenix, here are some simple maintenance tips you can use to keep the irrigationsystem in good working efficiency.
Regularly checking your water pressure
You should not only check your water system and irrigation mechanism once a year during summer – make it a regular thing, at least a number of time each season. The first checkup needs to be at the beginning of the season, just before you turn on the system for use.
The second checkup should be at the midway point of the season. Even better, do a checkup every month on at least one day. The aspects to look at include the controller, making sure it is functional and plugged in firmly; the backup battery, the time and date, the sensors and wires (making sure they are connected properly), and so on.
It is also good to change the requirements of irrigation, basing it on the current season as well as the conditions of the landscape. The final aspect to check is individual zone and examine if there any damage to the system.
Adjust the control timers according to the needs of the plants every season
Plants will not need the same amounts of water throughout the year, and you will need to adjust these levels according to the kinds of plants that are there.
The plants will need greater amounts of water in the peak of the summer season, compared to the cooler fall, winter and spring months. In fact they tend to have double the requirements of water during summer than other months, so ensure you change the settings of your irrigation system to the needs of your plants – including the running time of the system.
Examine the sprinkler heads
You may not think much of your sprinkler heads, but they need some care as well. Do not simply think that they are always in the best condition and assume they will always function perfectly.
The main reason you need to keep an eye out for them is because they tend to sink into the ground or break as they age. They also go through damage from your lawn mower, the regular aging from wear and tear, improper installation, as well as shifts of the soil bed.
Checking on them and replacing them when need be is an important aspect of the maintenance of an irrigation system, and you also need to replace any missing or damaged heads before irrigation begins. It is also wise to install heads of sprinklers on swinging pipes, as this will reduce the damage they are susceptible to by making them ‘float’ within the soil.
Check and repair the spray head leaks
The passage of time brings with it ageing of equipment, and in the case of sprinklers this is in form of dirt and debris slowly wearing away at the wiper seal. The long term consequence is several instances of leaking water at the upper region of the spray head.
This cannot be prevented, unfortunately, so you will need to replace the whole head when it occurs, especially when it is comprised of one unit. The good news is that there are some types of spray heads that you can remove and replace easily.
Flush the system before use
Before the season begins, you do not just turn the system on and expect it to work properly, especially when it has been down for some months, such as after winter. You need to flush it at the beginning of the season so that you prevent clogs that may be within the pipes. Otherwise, you just risk debris entering the irrigation system and blocking the nozzles, which ultimately results in the breakdown of the whole system.
Keep in mind that even the regular occurrences of wear and tear can also block the nozzles, as well as using a contaminated source of water.
Other than flushing of your system, it is a good idea to install screens on every sprinkler head, replace any nozzles that are clogged, and do proactive measures to improve the filtration efficiency of the system (which is why regular checkups are important).
Examine the details to help in the maintenance of the system
You might think the seemingly minor issues can just be brushed off and you will deal with them some other time, but the truth remains that even misaligned sprinkler heads can lead to some sections of your lawn becoming over-watered while others remain parched and brown.
This makes it very important to pay attention to the details – and realign them according to the instructions of the manufacturer.
Others may have a problem of settling due to soil accumulating around the head, as well as the after-effects of using lawn mowers or other equipment like lawn clippings. While you check the alignment of the sprinkler head, be sure to raise the head to its proper height, and you can do this through tall sprinkler bodies.
Install rain sensors
It does not make sense to be watering your lawn while it rains, yet this is a common problem because it leads to overwatering the plants. To avoid this, install a sensor that closes off programmed irrigators through the detection of moisture levels in the soil. This will also reduce wastage, as you can adjust it throughout the year according to the needs of your plants.
It is good to make your lawn lush and looking pleasing, but you need to maintain the systems that keep it in place. That requires careful attention on the state of irrigation systems, to ensure they perform at their best, regardless of the season.