Different Types Of Generators

What Are The 3 Different Types Of Generators?

Electric generators are considered to be lifesavers. They are backup power sources that convert fuel supply—usually propane, diesel, or gasoline, into electrical energy. They are the primary sources of electrical supply during power outages. This energy is used in an external circuit. Unlike standby generators, the following are not permanently installed in one place, so they’re easy to start.

There are three main types of generators: portable, inverter, and standby. Despite their differences, all these generators should undergo similar generator maintenance and products and parts updated from reputable sources such as Temp-Pro as required, to ensure long-term usability. Also, similar safety precautions should be taken to reduce the hazards posed by their operation. You can find a good inverter generator at Sydney Tools. Let’s now see, what are the 3 different types of generators.

  • Portable Generator:

A portable generator is powered by gas or diesel fuel and is used to provide temporary electrical power. One of the characteristics of the portable generator is that it can use a combustion engine to conduct electricity. Also, It can be easily plugged into electrical appliances or tools via its sockets. It can be wired into a facility’s subpanels. It can be used on remote sites. It has enough power to run a television, freezer, and refrigerator. The engine should run at 3600 rpm to render the standard 60hz of current. Use a governor to control the engine’s speed. It can also power tools and lights.

  • Inverter Generator:

An inverter generator uses an engine connected to an alternator to produce AC power. It also uses a rectifier unlike other generators to convert the AC power into DC power. Some of the characteristics of Inverter generator are:- It relies on high-tech magnets. Uses advanced electronic circuitry. Undergoes three phases to produce electricity. Outputs AC current converts it to DC current and finally inverts it to AC. Maintains a constant flowing of current to an appliance. Is more energy-efficient, as the engine speed adjusts itself according to how much power is needed. Its AC can be set to any voltage and frequency when used with proper equipment. Tends to be belittled and is lightweight. Can fit into a car, RV, or boat.

  • Standby Generator:

A standby generator is an electrical system that operates with an automatic transfer switch that commands it to power a device up during power loss. Here are some characteristics to note about these types of generators: Operates automatically. Delivers permanent power protection. Has two components: a standby generator and an automatic transfer switch.Can operate on liquid propane or natural gas.Will run on the fuel type already in use in the facility or home. Uses an internal combustion engine. Senses the power loss within seconds and boots up electricity so that power loss is felt very briefly. Executes automatic weekly self-tests to see that it is properly reacting to a power loss. Is constantly monitoring utility power. Used in safety systems for elevators, standby lighting, medical and life support equipment, and fire protection systems.

A routine maintenance practice is that of general inspection. It is important to inspect the oil as well, as it must be changed regularly. Oil change frequency depends on the manufacturer, how often the generator is used, and your work environment.